Шлюз KNX TP-BACnet IP сервер EK-BH1-TP-TCP

ekinex® работает как шлюз (преобразование протокола) между сетью BACnet IP (по интерфейсу Ethernet) и шиной KNX.‎ Работает как сервер в сети BACnet IP.‎ Требуется дополнительное питание.‎ Установка на DIN-рейку.‎

Power supply

• Power supply: 8...24 Vac or 12...35 Vdc
• Absorption at 24 Vdc: 3,5 VA

KNX side

• KNX TP (Twisted Pair) communication port electrically isolated from power supply
• 1440-byte volatile support “KNX image” memory buffer

BACnet (MS/TP version) side

• RS485 serial communication port, electrically isolated from power supply, 120 ohm termination resistance insertable by a 1-way microswitch
• BACnet communication
• Selectable baud rate from 1200 to 115200 baud
• BACnet objects exchange
• 1440-byte volatile support “BACNet image” memory buffer

BACnet side (IP version)

• Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category: 5E.Communication BACnet slave
• BACnet objects exchange
• 1440-byte volatile support “BACNet image” memory buffer
Configuration

• Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category: 5E.
Main characteristics

• Plastic casing
• Connection to bus line with KNX terminal block
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 145 g

Параметры